Easy cad software for beginners should provide all the necessary design tools and features required to produce high-quality detailed drawings and blueprints. When compared to other CAD software programs, the learning curve and time needed to become proficient with Cad Pro is minimal due to its simplistic interface and the wide array of tools available within the software. CAD software should not be hard to use or expensive. With Cad Pro you can quickly create your first CAD drawing within minutes.
When searching for easy CAD software for beginners, it can be difficult and time-consuming to find the best CAD Software for your specific tasks. Cad Pro’s user-friendly interface can be used by anyone to quickly design detailed drawings and blueprints of any kind.
The purpose of creating detailed 2D blueprints is to display your design as a two-dimensional (2D) representation on a sheet of paper. Since you might have a problem fitting a 500 ft. long, strip mall on your drafting table, you’ll need to use a ratio between the actual size of your structure and a smaller dimension on the sheet. This is referred to as the scale or scale factor. For example, a common architectural scale is 1/4″ = 1′-0″. This is read as: “one-quarter of an inch equals one foot”. If the front wall of your structure is 20 feet long, the line representing that face on your page will be five inches (5″) long. (20 x 0.25 = 5). When working with Cad Pro this way ensures that everything you draw is proportional and will fit together in the real world.
Different types of design industries use different standard scales. When working with civil engineering drawings, scales are in the full inch format, i.e. (1″ = 50′), while architectural and mechanical plans are more often done in fractional format (1/2″ = 1′-0″). Scales can be done in any unit of linear measure: feet, inches, meters, kilometers, miles, etc. The key is to pick a scale before you begin your design and use it for the entire design process.